Do you have a question about the Teac AD-RW900 and is the answer not in the manual?
Product classified as class 1 laser product. No hazardous invisible laser radiation during operation.
Technical details for CD recorder, cassette deck, MP3, USB, and digital audio input.
Steps to check and update the MCU firmware using a USB flash drive.
Instructions to prepare and execute firmware update for the Deck MCU using GenICE3000.
Procedures for checking CD player output level, distortion, response, S/N, and channel separation.
Notes and procedures for cassette deck adjustments, including cleaning and demagnetizing.
Product classified as class 1 laser product. No hazardous invisible laser radiation during operation.
Technical details for CD recorder, cassette deck, MP3, USB, and digital audio input.
Steps to check and update the MCU firmware using a USB flash drive.
Instructions to prepare and execute firmware update for the Deck MCU using GenICE3000.
Procedures for checking CD player output level, distortion, response, S/N, and channel separation.
Notes and procedures for cassette deck adjustments, including cleaning and demagnetizing.
| Audio Formats Supported | CD-DA, MP3 |
|---|---|
| Cassette Deck Section | Yes |
| Headphone Output | Yes |
| Remote Control | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Type | CD Recorder / Cassette Deck |
| Recording Media | CD-R, CD-RW |
| Playback Media | CD, CD-R, CD-RW, Cassette |
| Inputs | Analog (RCA), Digital (Optical) |
| Outputs | Analog (RCA), Digital (Optical), Headphone |
| Playback Speed | 1x |
| Signal-to-Noise Ratio | 90 dB (CD) |
| Dynamic Range | >90dB |
| Total Harmonic Distortion | <0.01% |
Loading...