s
BASIC FUNCTIONS
RADIO
Switching on/off: Save energy
– For
FM, pull out the telescopic antenna. Incline and
turn the antenna. Reduce its length if the signal i
too strong (very close to a transmitter).
– For AM the set is provided with a built-in antenna
so the telescopic antenna is not needed. Direct the
antenna by turning the whole set.
1 . To select your sound source adjust the source
selector to CD USB/AUX/ FM / AM.
2 . Adj
u
st the sound with the VOLUME
control.
3. To switch off the set, adjust the power switch
to
AUX position.
Radio reception
1. Slide the FUNCTION selector to desired FM or AM stations.
2. Rotate the TUNING
control to find the desired
stations.
3. When you have finished listening, slide the
POWER SWITCH selector to the
AUX position.
General operation
RADIO
Whether you are using AC power or battery supply, to
avoid unnecessaty energy consumption always adjust
the source selector to AUX.