Teac R-2 - Preset Tuning; How to select preset stations; Listening to an External Source

13
ENGLISH
12
Preset Tuning
You can store up to 10 stations into
memory.
Tune in a station you want to listen
to (see steps and of page 11).
Press the MEMORY button.
The PRESET indicator and a channel
number blink in the display.
Within 5 seconds, select a preset
location to store the station into
using the PRESET button.
Within 5 seconds, press the MEMORY
button.
The station is stored in memory.
Repeat steps to to store more
stations.
41
4
3
2
32
1
How to select preset stations
Press the PRESET button repeatedly until the
desired preset station is found.
Listening to an External Source
Connect the PHONES jack (audio
output jack) of a portable audio
player to the AUX IN jack of the R-2
using the supplied stereo mini plug
cable.
1
Play the source, and adjust the
volume using the VOLUME knob of
the R-2 and the audio player.
When using the PHONES jack of your mini
player, you must adjust the volume of the
mini-player or you may hear no sound
from your R-2.
4
Press the STANDBY/ON switch to turn
the unit on.
Repeatedly press the FUNCTION
button to select AUX.
3
2
PRESET MEMORY
2 3
4