Team Losi LXT Racing Monster Truck User Manual

Guidance on cross-referencing pages and steps between the LX-T manual and the 'XX' transmission manual for a smooth assembly process.

Provides a welcome message and lists the completed dimensions of the LX-T racing truck.

Explains the organization of kit parts into bags and how to effectively follow the instruction manual.

Details essential safety measures to be observed during the assembly and handling of the RC truck kit.

Lists all common and specialized tools recommended for the successful assembly of the LX-T.

Provides general notes on radio and electrical components, leaving specific choices to the owner.

Offers guidance on selecting motors and understanding gear ratios for optimal performance on various tracks.

Instructions for attaching the front shock tower and its shock mounts using specified screws and nuts.

Steps for threading ball studs into the shock tower and securing the tower to the front bulkhead.

Guidance on attaching the left and right front suspension arms using hinge pins and E-clips.

Steps for attaching the body mount slide and the main body mount to the front bulkhead.

Detailed steps for assembling the front spindle carriers, including axles, hinge pins, and ball studs.

Instructions for attaching the completed spindle carrier assemblies to the front suspension arms.

Steps for creating and attaching the adjustable front camber links using turnbuckles and rod ends.

Final steps to mount the entire assembled front end, including the bumper, to the main chassis.

Steps for attaching steering posts to the chassis and assembling the steering bellcrank.

Guidance on connecting the steering sector arm to the idler arm and bellcrank using ball studs and screws.

Instructions for creating tie rods from turnbuckles and connecting them to the steering sector arm and spindles.

Steps for attaching foam pads to the chassis and battery box, and assembling the battery box lid.

Instructions for attaching the battery box to the chassis and mounting the antenna system.

Steps for assembling the internal pinion gear, shaft, E-clips, and set screw for the gearbox.

Guidance on inserting bearings into gearbox halves and installing the output gear and U-Joint outdrive.

Detailed steps for assembling the center differential, including gears, balls, washers, and thrust assembly.

Steps for placing the assembled differential and top gear shaft into the gearbox halves.

Securing the gearbox halves to the motor plate and assembling the universal pivot for the drive shaft.

Detailed instructions for assembling the slipper clutch components, including bearings, pads, springs, and retainers.

Attaching rear battery spacer, strap, and threading ball studs into the rear bulkhead.

Instructions for attaching the rear shock tower, spacer, and securing the rear bulkhead to the chassis.

Steps for adding the chassis spacer between the rear bulkhead and the main chassis.

Instructions for positioning and securing the gearbox and motor plate to the chassis and rear bulkhead.

Steps for aligning and inserting the rear H-arms using hinge pins and E-clips.

Instructions for assembling the rear hub carriers with ball studs and bearings.

Steps for placing hub carriers between H-arms and securing them with hinge pins and spacers.

Detailed steps for creating and attaching the adjustable rear camber links.

Steps for assembling rear axle universal pivots and connecting them to the drive shafts.

Instructions for inserting rear axles through hub carriers and securing them with pins and spacers.

Steps for aligning drive shafts and connecting them to the H-arms.

Final steps for attaching the rear camber links to the chassis and hub carriers.

Steps to assemble the shock cartridges with O-rings, spacers, and caps.

Guidance on adding oil to shock shafts and threading them into lower shock mounts.

Instructions for installing pistons and securing them with E-clips onto the shock shafts.

Steps for filling shock bodies with oil and properly bleeding air for optimal shock performance.

Final steps for attaching shock cups, springs, and collars to the shock bodies.

Instructions for attaching the fully assembled front and rear shocks to the chassis suspension points.

Steps for inspecting tires, mounting them onto front wheels, and installing wheel disks.

Instructions for installing bearings into front wheels and securing them onto the front axles.

Steps for repeating the tire and wheel mounting process for the rear wheels and disks.

Instructions for attaching the motor, adjusting gear mesh, and securing the gear cover.

Steps for threading the antenna wire and securing the antenna mount and cap.

Guidance on mounting the radio receiver and speed controller onto the chassis using servo tape.

Steps for attaching the servo and creating the steering linkage rods.

Instructions for attaching the front chassis stiffener to the main chassis.

Instructions for preparing and painting the Lexan body shell, gear cover, and wheel disks.

Guidance on trimming the body shell, making mounting holes, and securing it to the chassis.

Instructions on how to cut, position, and apply the included stickers to the model.

Explanation of toe-in and toe-out angles and their effect on handling, using diagrammatic representation.

Explanation of positive and negative camber angles and their impact on tire contact and steering.

Advice on adjusting the gearbox, particularly the differential, for optimal performance and longevity.

Guidance on setting the slipper clutch for different track conditions and ensuring proper slip.

Recommendations for setting front and rear ride height and choosing shock mounting locations.

Explanation of rear anti-squat and toe-in adjustments for traction and stability.

List of spare parts for the front shock tower, bulkhead, suspension arms, and steering components.

List of spare parts for the gearbox, differential, slipper clutch, and drive shafts.

List of spare parts for the chassis, battery box, body mounts, and antenna.

List of spare parts for gearbox halves, output gears, U-joints, and differential components.

List of spare parts for suspension components, chassis spacers, and hardware like screws and nuts.

List of spare parts for rear suspension arms, hub carriers, axles, driveshafts, and shock components.

List of spare parts for wheels, tires, wheel disks, servo tape, and antenna components.