Team Losi Mini-LST2 User Manual

Operation Manual
Introduction
Thank you for purchasing the Mini-LST2 from Losi
®
. This guide contains the basic instructions for operating your
new Mini Monster Truck. While the Mini-LST2 is great for first-time R/C drivers, it does require some mechanical
experience and/or adult supervision for drivers under the age of 12. It is crucial that you read all of the instructions,
safety warnings, and accompanying printed material in order to operate your new model correctly and avoid
unnecessary damage. Please take a moment to look the documentation over before running your new Mini-LST2.

Team Losi Mini-LST2 Specifications

General

Scale	1/18
Drive System	4WD
Radio System	2.4GHz
Battery	7.2V NiMH battery pack
Suspension	Independent
Drivetrain	4WD

Summary

Product Introduction and Overview

Welcome to the Mini-LST2 Manual

Thanks for purchasing, this guide provides basic operation instructions for your new model.

Safety, Warranty, and Customer Support

Product Warnings and Safety Precautions

R/C models are not toys; operate with caution, common sense, and adult supervision.

Warranty Period and Damage Limits

Details limited warranty, remedies, damage limits, and user liability acceptance.

Assistance, Questions, and Repairs

Contact information and process for obtaining assistance or product repair services.

Warranty Service and Additional Safety Notes

Warranty Inspection and Non-Warranty Repairs

Procedures for warranty service, including proof of purchase and non-warranty repair policy.

Lithium Polymer Battery Safety

Manufacturer's instructions and warnings for Li-Po batteries due to volatility.

System Components and Initial Setup

Required Equipment and Handy Tools

Lists necessary batteries and tools for operating the model.

Radio System Components Overview

Explanation of receiver and Electronic Speed Controller (ESC) functions.

Resetting the Electronic Speed Controller (ESC)

Step-by-step guide for re-setting the ESC to factory defaults.

Transmitter Operations and Binding

Transmitter Control Identification

Identifies and explains the function of each control on the transmitter.

Re-Binding Transmitter to Receiver

Instructions for re-establishing communication between transmitter and receiver.

Chassis Tuning and Adjustments

Slipper Clutch Adjustment

How to adjust the slipper for drivetrain protection and performance tuning.

Steering Rate Adjustment

Modifying steering sensitivity for different traction conditions.

Toe-In/Toe-Out Configuration

Setting front wheel alignment for stability and tracking.

Ride Height and Component Replacement

Adjusting Ride Height

How to change the chassis's ground clearance using shock collars.

Spur Gear and Servo Maintenance

Procedures for changing the spur gear and replacing the steering servo.

Gear Mesh, Cleaning, and Service

Setting the Gear Mesh

Proper procedure for setting pinion and spur gear mesh for optimal performance.

Radio System Service and ESC Removal

How to handle radio issues and safely remove the ESC unit.

Model Cleaning Guidelines

Recommended methods for cleaning the RC model without causing damage.

Front and Rear Differential Rebuilding

Differential Reassembly Steps

Detailed instructions for rebuilding the front and rear differential assemblies.

Center Transmission Rebuilding Procedures

Center Transmission Disassembly

Step-by-step guide to remove and disassemble the center transmission.

Shock Rebuilding and Refilling

Shock Fluid and Assembly Guide

Instructions for rebuilding shocks and refilling with appropriate shock fluid.

Regulatory Compliance and Contact Information

FCC Compliance Statement

Information regarding FCC rules for radio transmitter operation and cautions.