ASSEMBLY INSTRUCTION
Place propane gas tank (not included) into the
metal stand (G). Make sure the gas tank
sits on the metal stand completely.
G
Pour the lava rocks into the firebowl
CAUTION
To ensure proper function, the guard on this
burner should be free of lava rocks at all
times.
Questions?
Scan Here
Kno
b
Button
（1）
（2）
Regulator
Knob
Adapter of the gas tank
Step1:Turn the knob to the position shown in the
figure(1).
Step2:Press the regulator down in the direction
shown in the figure(1) while holding down the
regulator button to connect the regulator connector
with the gas cylinder adapter .
Step3:Release the button,pull the regulator by
hand to make sure that the regulator is connected
to the the adapter of gas tank.
Step4:Turn the knob to the position shown in
figure(2).
14
To Next Page
Loading...