What to do if the Teamson PT-SF0001 Outdoor Furnishing pump operates but no water is running through the fountain top?
If the Teamson Outdoor Furnishing pump operates but no water flows through the fountain top, examine the tubes and pump for sediment or scale buildup. Clean the tube and the pump to remove any obstructions.
Why does my Teamson Outdoor Furnishing pump not operate even though the solar panel is in full sunlight?
If the Teamson Outdoor Furnishing pump isn't working even in full sunlight, first verify the connection to the solar module. If the connection is good, the impeller may be blocked. Remove the pump filter, gland, and rotor to clean the pump. Use a small brush or stream of water to eliminate any debris.
Details the solar pump's operation in sunlight, battery pack storage, and LED light activation in darkness.
Explains the function of the power button on the solar panel for turning the fountain on and off.
Guides on unpacking, setup precautions, connecting fountain parts, pump, LEDs, and solar panel.
Lists critical safety instructions for handling the solar panel and operating the fountain.
Describes how different weather conditions affect pump operation and battery charging.
Provides guidance on cleaning the pump and solar panel, and resolving common operational issues.
Visualizes all parts via exploded drawing and lists each component with quantities.
Details the sequential steps for assembling the fountain, including jar, wiring, and solar panel placement.
This document describes the Peaktop Solar Powered Wall Fountain with Two Pots Two Bowls (model PT-SF0001), a decorative and functional outdoor water feature designed to enhance garden or patio spaces. The fountain operates using solar energy, making it an eco-friendly and cost-effective addition to any outdoor setting.
The Peaktop Solar Powered Wall Fountain is a self-contained water feature that circulates water using a solar-powered pump. Its primary function is to create a soothing ambiance through the gentle flow of water, mimicking the sound and visual appeal of a natural spring or waterfall. The fountain features two pots and two bowls, arranged in a cascading design, allowing water to flow from the top jar down through the bowls and into the main basin, where it is then recirculated by the pump.
The solar pump system is designed for continuous operation during daylight hours when sufficient sunlight is available. It is equipped with a battery pack that stores excess solar energy. This stored energy allows the fountain to operate even when sunlight is not strong enough, such as on cloudy days, or during the evening hours. This ensures that the water flow and the integrated LED lights can continue to function, extending the enjoyment of the fountain beyond just peak daylight.
In addition to its water circulation function, the fountain also includes three warm LED lights. These lights are designed to illuminate automatically when it gets dark, enhancing the visual appeal of the water jet and the overall fountain scene during the evening. This feature transforms the fountain into an attractive focal point for nighttime outdoor gatherings or quiet contemplation.
The fountain is designed for straightforward assembly and operation. Users are advised to unpack all components carefully and to be mindful that some water may splash over the rim of a bowl, so it should not be set up on surfaces that could be damaged by water.
Assembly:
Operation: To ensure optimal performance, the solar unit should be charged for at least two days before its initial use. The solar panel needs to be placed in direct sunlight to power the pump and charge the battery effectively. When sunlight is strong, the pump will automatically start working. If the fountain is intended for evening use, the LED lights will activate automatically in the dark. To test the LED lights during the daytime, the solar panel can be turned upside down to minimize light exposure.
A button (switch) located on the back of the solar panel controls the fountain's operation.
The fountain's performance is dependent on weather conditions:
Regular maintenance is crucial to ensure the longevity and optimal performance of the Peaktop Solar Powered Wall Fountain.
Pump Maintenance: Over time, the pump may experience a loss of power or stop working due to the build-up of sediment, scale, or dirt. To address this, users should:
Solar Panel Maintenance: The solar panel should be cleaned periodically with a soft tissue. Regular cleaning is recommended to maintain its efficiency in converting sunlight into direct current, thereby ensuring consistent power supply to the fountain.
General Cautions:
By following these guidelines for assembly, operation, and maintenance, users can ensure that their Peaktop Solar Powered Wall Fountain provides many hours of enjoyment and aesthetic enhancement to their outdoor living spaces.
General| Seating Capacity | 4 |
|---|---|
| Color | Black |
| Weight Capacity | 250 lbs per chair |
| Indoor/Outdoor Use | Outdoor |
| Tabletop Material | Glass |
To Next Page
