Tebas BP-100HS-A - Procedure of Use

16
Procedure of use
Action
External
Appliance
or Button of heat
pump
Display
Heat pump
answer
Put the heat pump
under tension
Engage the circuit
breaker of the heat
pump
Display current water
temperature
Put in circulation
the swimming
pool water into
the pipes
Engage the circuit
breaker of pump of
filtration
Chose the operation
mode
Press the button
MODE
Stop for 3-4 minutes,
reverse of cycle and
restart in a new mode
Set the water
temperature
into the
swimming pool
,
adjustable from
15°C to 40°C
The heat pump heats
or cools until the
required temperature
(P7/P8)
Start
Press the button
Start between 1-
4 minutes in the
previous operation mode
(heating/cooling/auto)
Stop
Press the button
Immediate stop
and wait
Switch off
Use the circuit
breaker of pump
of filtration,
and heat pump
Complete stop
17