44 OWNER’S MANUAL
The full force of the cam action is needed to clamp
the wheel securely. You cannot secure the quick
release mechanism by twisting the adjusting nut.
Never use the QR lever to wind up the mechanism.
Tighten or loosen using the adjusting nut with the
QR lever in the open position.
FRONT WHEEL SECONDARY RETENTION DEVICES
Some bicycles have front forks which use a
secondary wheel retention device to keep the wheel
from disengaging if the axle nuts loosen.
Some bicycle front forks have a shaped lug which
acts to keep the wheel from disengaging if the axle
nuts are loosened. To remove the wheel the axles
nuts (or quick release mechanism) must be backed
off far enough for the wheel to be removed.
To Next Page
Loading...
