EasyManua.ls Logo

Tebco EXPLORER - DERAILLEUR ADJUSTMENT

Default Icon
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
67OWNERS MANUAL
Practice changing to a lower gear before
stopping. This will assist easier starting at take-off.
As you gain more experience with your gear ratios
you will be able to select the most suitable gear
for the terrain and weather conditions.
NOTE: Your bicycle retailer will be able to assist you
if you are uncertain about the steps in shifting gears.
DERAILLEUR ADJUSTMENT
Sometimes your rear derailleur needs adjustment.
You may need to tighten the derailleur cable to
remove excessive cable slack. Excessive slack in the
cable will cause the derailleur to miss shift. Locate
the Adjusting Barrel on the back of the derailleur.
Turn the barrel ANTI-CLOCKWISE half a turn and
test the derailleur by changing gear.
Continue to turn the barrel until the chain is
pitching correctly onto each gear.
NOTE: If you are not sure of these steps consult
your bicycle retailer.
After the initial settling in period, if you have any
adjustments that need attention, return to your
bicycle retailer for advice.

Related product manuals