EasyManua.ls Logo

Tebco SUBURBAN - Battery Charging and Care; Battery Charging Procedure

Tebco SUBURBAN
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 OWNER’S MANUAL
BATTERY CHARGING
1. The battery is the most important part of
your ELECTRIC BICYCLE or ELECTRIC
TRICYCLE. To ensure good performance
- proper usage and maintenance will
maximise battery life.
2. Leaving the batteries discharged for long
periods of time should be avoided at all
times. Batteries should always be charged
ready for riding. If not used for a period of
30 days, batteries should be charged fully.
3. After usage and when bicycle is not in use
always be sure to turn Power off. If bicycle
left unattended with Power ON for 5
minutes then electric system will auto turn
Power OFF.
4. To use battery charger, rst insert the plug
into charging socket on side of battery.
Next plug the charger into a 240V power
supply. After the charger is connected
properly, turn on 240V AC supply. To
disconnect after charging, turn off 240V
AC supply, remove plug from 240V socket
then remove the plug from the battery
socket. REFER TO BATTERY CHARGER
OPERATING INSTRUCTIONS SUPPLIED
WITH YOUR CHARGER
5. When charging the battery, charger status
lamp will glow RED to indicate ‘charging’.
When lamp turns GREEN ‘charging’ is
complete and charger should be turned OFF.

Related product manuals