Need help?Do you have a question about the TECALEMIT TEC 3000X and is the answer not in the manual?
Requirements for floor, location, leveling, and securing the base frame with anchors.
Installing columns, connecting the drive chain, and securing the base to the floor.
Fitting lifting arms to carriages and installing lifting pads.
Installing arm lock devices and protective covers for components.
Connecting power supply and testing hoist operation and limit switches.
Lubricating moving parts and performing final operational checks.
Step-by-step procedure for safely raising a vehicle using the hoist.
Procedure for safely lowering a vehicle and the hoist.
Daily checks for safety nuts, lift pads, and oil levels.
Monthly checks for oil level, vee belts, and lifting pad condition.
Checks for lift nut gap, chain tension, and arm lock operation.
Detailed steps for safely dismantling a hoist column.
Procedure for reassembling the hoist column and its components.
Troubleshooting issues related to the hoist motor not running or lacking power.
Diagnosing problems when the hoist struggles to lift or stops under load.
Identifying and resolving mechanical noises from the carriage, drive pulley, or base frame.
Addressing rapid nut wear and hoist stopping failures.
Comprehensive list of parts for single-phase and three-phase hoist configurations.
Exploded view diagram showing component assembly for the hoist.
Ensuring operational safety through a daily visual inspection of lift nuts.
Measuring the gap between lift and safety nuts every three months for safety.
General| Brand | TECALEMIT |
|---|---|
| Model | TEC 3000X |
| Category | Lifting Systems |
| Language | English |
To Next Page