Need help?Do you have a question about the Tecamp Puma 1000 and is the answer not in the manual?
General| Type | Bass Amplifier Head |
|---|---|
| Channels | 1 |
| Effects Loop | Yes |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 4 Ohms |
| EQ | 4-band |
| Power Output | 1000W @ 4 Ohms, 700W @ 8 Ohms |
| DI Output | Yes, Pre/Post switchable |
| Inputs | 1 x 1/4" instrument input |
Critical safety guidelines for operating the apparatus to prevent hazards and ensure safe usage.
Covers INPUT jack, CLIP LED, GAIN control, and -10 dB switch for optimal signal adjustment.
TASTE control for tonal character, ATTACK TIME switch, and COMPRESSOR for dynamic control.
BASS BOOST, LO, LO MID, and HI MID controls for comprehensive frequency shaping.
HI control shapes high frequencies (5 kHz), HI BOOST adds 12 dB at 10 kHz.
LINE/EFFECT MIX balances external effects or line sources with the dry signal.
MASTER controls overall output. MUTE switch provides silent tuning and break operation.
DI provides balanced output. POST switch selects PRE or POST preamp signal.
POWER switch turns the amp on/off. FS/MUTE connects an optional footswitch for remote MUTE.
POWER RECEPTACLE, FUSE, and VOLTAGE SELECTOR for power connection and voltage compatibility.
TUNER jack for silent tuning. LINE OUT provides a line-level signal for external devices.
EFFECTS LOOP (SEND/RETURN) for external processing. LINE IN allows external audio source connection.
SPEAKER outputs for cabinets. BRIDGE MODE option combines amps for higher power.
CHANNEL B speaker output with individual VOLUME. SUB ON/OFF filter for low-end enhancement.
CHANNEL A speaker output with individual VOLUME control for flexible speaker balancing.
Includes rack ears for installing the PUMA 1000 into a standard 19-inch rack.
To Next Page
