Need help?Do you have a question about the Teccpo TART04P and is the answer not in the manual?
General| Model | TART04P |
|---|---|
| Category | Power Tool |
| Type | Cordless Drill |
| Voltage | 20V |
| Battery Type | Lithium-Ion |
| Chuck Size | 3/8 inch |
Keep workspace clean and well-lit to prevent accidents.
Precautions regarding power plugs, cords, and wet conditions.
Stay alert, use PPE, and prevent unintentional starting.
Use correct tool for application, avoid forcing, and check for damage.
Keep tools sharp, clean, and check for alignment issues.
Ensure safety by using qualified repair with identical parts.
Safety warnings applicable to all functions like grinding and sanding.
Use compatible, undamaged, and properly fitted accessories.
Wear appropriate PPE like goggles, masks, and gloves.
Maintain a safe distance for bystanders from the work area.
Hold tool by insulated surfaces and manage cords properly.
Maintain a firm grip and use clamps for workpiece control.
Avoid carrying tool at side, wait for stop, and clean vents.
Avoid flammable materials and liquid coolants.
Understanding and preventing kickback incidents.
Position body and grip tool to resist kickback forces.
Specific safety for grinding/cutting, including wheel/mandrel use.
Avoid jamming wheels, control hand position, and handle pinched wheels.
Proper cut restart and supporting large workpieces.
Beware of thrown bristles and direct brush discharge.
Lists the primary functions like cutting and sanding.
Understand tool features and safety requirements before use.
How to operate the power switch for turning the tool on/off.
Steps to remove and insert collets for accessories.
Detailed steps for securely attaching accessories to the tool.
How to safely detach accessories from the tool.
Instructions for using the standard mandrel with accessories.
Instructions for using the drum mandrel with sanding drums.
Instructions for using the screw mandrel with accessories.
Adjusting accessories for proper balance and reduced vibration.
How to select and adjust the speed for different jobs and materials.
Steps to install the detailer's grip attachment on the tool.
Steps to detach the grip from the tool.
Overview of the grip's purpose and how to hold the tool.
Describes Pencil, Side, and Stable grips for control.
Guidance on choosing the right speed for materials and tasks.
Steps to install the cutting guide attachment on the tool.
Safety precautions specific to the flexible driver attachment.
Steps for correctly attaching the flexible driver to the rotary tool.
How to use the flexible driver attachment for optimum performance.
Initial run-in process for the flexible driver before use.
Warning about shaft disengagement and how to avoid it.
How and when to lubricate the flexible shaft for maintenance.
General guidelines for cleaning the rotary tool and its parts.
Notes on internal maintenance requirements of the equipment.
Guidance on recycling waste electrical products responsibly.
To Next Page