Tech 21 SansAmp PARA DRIVER DI User Manual

T: 973-777-6996
E: info@tech21nyc.com
W: www.tech21nyc.com
© 2005
DESIGNED AND MANUFACTURED IN THE U.S.A.
OWNER’S MANUAL
POWER REQUIREMENTS
*Operable with phantom power supply, minimum 24V DC regulated, however, 48V DC regulated is
recommended in order to illuminate LED.
*Utilizes standard 9V alkaline battery (not included).To install, simply remove door cover. (NOTE:
The Input activates battery.To conserve energy, unplug when not in use.) Power Consumption:
approx. 5mA.
*USE DC POWER SUPPLY ONLY! Failure to do so may damage the
unit and void warranty. DC Power Supply Specifications:
-9V DC regulated or unregulated, 100mA minimum;
-2.1mm female plug, center negative (-).
Optional factory power supply is available:Tech 21 Model
#
DC2.
WARNINGS:
* Attempting to repair unit is not recommended and may void warranty.
* Missing or altered serial numbers automatically void warranty. For your own protection: be sure
serial number labels on the unit’s back plate and exterior box are intact, and return your warranty
registration card.
ONE YEAR LIMITED WARRANTY. PROOF OF PURCHASE REQUIRED. Manufacturer
warrants unit to be free from defects in materials and workmanship for one (1) year from date of
purchase to the original purchaser and is not transferable.Warranty does not include damage result-
ing from accident, misuse, abuse, alteration, or incorrect current or voltage. If unit becomes defective
within warranty period,Tech 21 will elect to repair or replace it at no cost.After expiration,Tech 21
will repair unit for a fee.
ALL REPAIRS for residents of U.S. and Canada: Call Tech 21 for Return Authorization Number.
Manufacturer will not accept packages without prior authorization, pre-paid freight (UPS preferred)
and proper insurance.
FOR PERSONAL ASSISTANCE & SERVICE:
Contact Tech 21 weekdays from 9:00 AM to 5:00 PM, EST.

Tech 21 SansAmp PARA DRIVER DI Specifications

General

Technology	Analog
Model	SansAmp PARA DRIVER DI
Manufacturer	Tech 21
Inputs	1 x 1/4"
Polarity	Negative Center
Bypass	True Bypass
Type	Bass Preamp/DI Pedal
Outputs	1 x 1/4", 1 x XLR
EQ	3-band EQ
Controls	Level, Mid, Treble
Power Source	9V DC
Weight	1.5 lbs

Summary

Power Requirements and Warnings

Use DC Power Supply Only

Critical warning to use only a regulated 9V DC power supply with a 2.1mm female plug, center negative.

Warranty and Service Information

Details on one-year limited warranty, serial number requirements, repair authorization, and customer support.

Product Overview and Applications

Applications

Various ways to use the SansAmp Para Driver DI with instrument amps, power amps, and PA systems.

Guide to Controls and Connections

Guide to Controls

Detailed explanation of each control knob, including Drive, Bass, Treble, Mid Shift, Mid, Blend, and Level.

The Ins and Outs

Information on connecting the unit, including input/output jacks, footswitch, and level switches.

Important: Turn On First. Turn Off Last.

Crucial procedure to avoid unwanted sonic "pops" when connecting/disconnecting equipment.

Input Jack

Parallel Output

Balanced XLR Output

1/4" Output

Advanced Features and Settings

Footswitch Operation

Phantom Power

Phantom & Ground Connect Switch

Speaker Simulation

Noteworthy Notes & Considerations