12
Security Expert
for Your Home and Business
Tips:
New HDD has to be formatted before recording. You can go to “Main Menu”>“Advanced”>“HDD
Info”> Select the HDD and then “Format Storage”
Find “Main Menu” > Record Conf.> you can schedule the record period and what to drive the
starting of the record, like regular or motion detection or alarm. You can set these for different
channels.
The system may not include HDD if you did not select the kit with HDD. The system can work with
3.5” or 2.5” SATA Hard Drive.
① Unplug your NVR from power, unscrew and remove the top cover.
② Connect the SATA power and data cables from the NVR to the corresponding ports on your
HDD
③ Holding the hard drive and the NVR , gently turn it over and line up the holes on the hard
drive with the holes on the NVR. Use a phillips screwdriver, screw the provided screws into
the holes and assemble the cover
05
Video Record
1. HDD Install
2.Record Video
To Next Page
Loading...