RTSP Data as below:
rtsp://192.168.1.10:554/user=admin&password=
&channel=1&stream=0.sdp?
"192.168.1.10" : this is the IP of the camera, you can find and
modify it in the "DeviceManage" software.
(Download it in on our website :
https://www.techage.com/pages/download)
":554": this is the RTSP server port , you can change it in the
network service.
"user=admin" : this is the user name for your camera, as
default it is "admin"
"password=" : this is the password for your camera, as
default it is none. If you changed it, please update it.
"Channel=1" : it means the first channel. If it is only for one
camera it is "1".
"stream=0.spd?" : it means the main video stream.
2. View on Blue Iris
2.2 Click "Find/inspect" and choose the IP or the IP
camera you want to add . Click "OK".
2.1 Open your Blue Iris 5 software, click menu >> "Add
new camera".
Then you follow picture below and "Enable audio" if your
camera is with audio.
07
20
To Next Page
Loading...
