Need help?Do you have a question about the Techage WiFi Camera System and is the answer not in the manual?
General| Motion Detection | Yes |
|---|---|
| Two-Way Audio | Yes |
| Weather Resistance | IP66 |
| Night Vision | Yes |
| Weatherproof | IP66 |
| Storage | Micro SD card (up to 128GB) |
Avoid light reflection from IR lights to the lens by adjusting camera position.
Prevent light reflection by moving objects away from camera lens.
Prevent light reflection by moving cables away from camera lens.
Configure basic wireless network settings for the NVR.
Connect NVR to WiFi by selecting name and entering password.
Check NVR's network status and IP address.
View HDD information and manage storage settings.
Scan QR codes to download EseeCloud App for remote access.
Add cameras wirelessly to the NVR.
Add cameras supporting ONVIF protocol via search.
Re-add camera via Ethernet cable if wireless connection is lost.
Use cameras as relay devices to extend WiFi signal range.
Connect cameras via network cables to NVR for video if out of WiFi range.
Configure motion detection, tracking, and alarm notifications.
Select suitable IR-CUT modes for cameras based on environment and needs.
Control camera movement, zoom, focus, and enable auto tracking features.
Configure recording schedule for time, motion, or alarm events.
Search and playback recorded video clips by date.
Select and backup recorded videos by channel, mode, and time period.
Configure sender, receiver, and SMTP server details for email alerts.
Enable IMAP access and generate a 16-digit app password for email setup.
Add device to EseeCloud App for remote viewing on smartphone.
Share device access via QR code to family members through the EseeCloud App.
Download and use EseeCloud PC software for remote viewing.
Access NVR via web browser using IP address on the same network.
To Next Page
