03
Security Expert
for Your Home and Business
WiFi AI camera
2.1 Smart WiFi Setup
Power on the camera with the power adapter. The white lights in the camera will be on for
seconds ,and the camera will be in WiFi and initialization mode and you can add your camera to
WiFi. (You can also press the reset button to get the camera into the initialization mode and
program the WiFi.)
Before adding, please ensure your Smart phone connected to the WiFi of the same router as the
WiFi Smart camera. And keep the camera and your smart phone nearby the router within 10 feet.
Click the “+” in the right above corner, then click “Setup My Device to WiFi”, and then follow the
steps, there will be voice prompt for each step. After you set the WiFi into the camera successful-
ly you will hear a voice prompt and it will go to the “Set Password” page. After password setting,
you can name the device and start enjoying the video surveillance.
If you still can not connect the WiFi to the camera successfully, please try to use the wired
Ethernet cable to connect it to WiFi as below.
Use the Ethernet cable with the camera to connect it to the router. Ensure your smart phone is
connected to router’s WiFi. Click the “+” in the right above corner, then click “More” and choose
“Add device in the same WLAN” , then there will be a list of the cameras in the same WLAN.
Choose the camera you want to add. And then back to the video image page of the camera.
2.2 Wired Ethernet Cable to Setup WiFi
To Next Page
Loading...
