Techfine 1KVA - 4.4 Battery Connection

4.4 Battery Connection
CAUTION: For safety operetion
and reguation compliance,it's
requested to install a separale
DC
over-current
protector
or
disconnect device between battery
and inverter.lt I may not be
requested to have a disconnect
device in some applications,
however, it's still requested to
over-current
protection
installed. Please refer to typical amperage
in
below
table as required
fuse or breaker size.
Ring terminal:
WARNING!
All wiring must be
performed
by be
qualified
personnel.
WARN lN G !
lt's very importa nt for system safety and
efficient operation
to use appropriate
cable for battery connection.
To reduce risk of injury,
plese
Lrse the
proper
recommended cable and terminal size as below.
Recommended
battery cable and
terminalsizei
please
follow below steps to implement battery
connection:
l.Assemble battery
ring terminal based on
recommended
baltery
cable and terminal size.
[,1od
el
Typical
Amperage
Battery
capacrly
Wire
Size
Ring Tefminal
Torqu e
value
Cable(mm')
Drm en sro n s
u(mm)
L(mm)
I KVA/ 2KVA
66A lOOAH
1-6AWG 14
6.4 39.2
2-3
Nm
2-1OAWG 8 6.4
23.8
3KVA
100A
lOOAH
1-4AWG
22 6.4 33.2
2-3
Nm
2OOAH
2'8AWG
'14
6.4 29.2
110A
2OOAH
1-2AWG 38 6.4
39.2
2'3 Nm
2-6AWG
2B 6.4 33.2
5 KVA
1'10A 2OOAH
1'2AWG 38
6.4 39.2
2-3 Nm
2'6AWG 28 6.4 33.2