EasyManua.ls Logo

Techlink RECHARGE 2600 User Manual

Techlink RECHARGE 2600
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions
Warranty information
All Recharge devices are covered by a One (1) year
warranty against the defects or fault from the date of
the original purchase. Please retain your receipt as
proof of purchase. This does not affect your statutory
rights. The warranty does not cover :
1) misuse or abuse of this product,
2) operation outside of directed use or
3) unauthorized service or modification.
Please contact Techlink to obtain service, repair or
refund under warranty.
Legal
The Recharge devices are certified to ETL, FCC, CE,
RoHS, WEEE and MFi standards and regulations where
required. Please contact Techlink for further information.
Every effort has been made to provide accurate and
complete information in this manual, no liability will be
made for errors and/or omissions made. Techlink
reserves the right to make changes and improvement
to all capacities of the Recharge device including:
specifications, features, hardware and firmware of the
product described in this manual without prior notice.
©2013 by Techlink. All rights reserved. Techlink and
Recharge marks are owned by Techlink and may be
registered. All other marks are the property of their
respective owners.
Product Name: RECHARGE 2600
Art number: 527011/12/13/14
salesdesk@techlink.uk.com
www.techlink.uk.com
www.recharge.uk.com
Web
(UK)Free Phone 0800 634 2699
(US)Toll Free (844) 499-1159
Recharge your device
1 2 3
Recharge the Recharge (UK)
1 2 3
Question and Answer IconNeed help?

Do you have a question about the Techlink RECHARGE 2600 and is the answer not in the manual?

Techlink RECHARGE 2600 Specifications

General IconGeneral
Product TypePower Bank
Battery Capacity2600 mAh
Capacity2600 mAh
Output Voltage5V
Output Current1A
Input Voltage5V
Input Current1A
Charging Time3-4 hours
CompatibilitySmartphones, Tablets, and other USB-powered devices

Summary

Recharge Your Device

Connect to Device

Connect the USB cable to the power bank and your mobile device.

Start Charging Mobile

The power bank will begin charging the connected device.

Recharge the Recharge (UK)

Connect to Mains Power

Plug the adapter into a UK mains socket to charge the power bank.

Full Recharge Indicator

The device indicates '100% Charged' when recharging is complete.

Warranty Information

Legal and Compliance