Techly IDATA KB-300W - Re-establishing Connection; Connection Procedure

9
www.techly.com
EN
Youneedtobuildupagaintheconnectionbetweenthekeyboardandreceiveriffollowing
situationhappens:
•Thereisradiodisturbancefromotherwirelesskeyboardormouse
•Somebodytrytobuilduptheconnectionbutfailed
build up the ConneCtion betWeen the keyboard and reCeiver
TakeoutthereceiverfromcomputerUSBportrstly.Press“leftShift+ESC”,theindicator
onthekeyboardwilllight,itstartstheconnection.Releasethe“LeftShift+ESC”and
insertagainthereceivertothecomputer(20cmdistanceisneededbetweenkeyboard
andreceiver).Ifconnectionbuiltupsuccessfully,thekeyboardcanworknormallyifthe
lightstopslighting.Ifnot,pleaserepeattheabovesteps.