Techly IDATA SPDIF-9 - Panel Description; Connection and Operation

5.0 panel DeSCription
6.0 ConneCtion anD operation
Before installation, please make sure all devices you wish to connect have been turned off.
1)ConnecttheaudiosourcedevicetotheConverterusingappropriateToslinkorCoaxial
cables
2)ConnecttheA/VReceiversorAmplifierstotheConverterusingappropriateR/Lcable
3) Powered on the converter by USB cable
Note: When connected to the Toslink and Coaxial cables at the same time, the product will
give priority to Toslink input
Attention: Insert / Extract cable gently.
EN - 4
WWW.TECHLY.COM
DIGITAL TO ANALOG
AUDIO CONVERTER