Techly IUSB2-CAR2-24A2P - Operation

10
CAR CHARGER 5V 2.4A DOUBLE USB
EN
5.0 OpERATION
Operation Procedure
1.PlugtheUSBcarchargerintothecarcigarettelighter,andLEDlightturnsblue.
2. Plug the USB connector of the USB cable into the car charger's output interface, then plug the other
end of the USB cable into the electronic equipment (such as mobile phone, MP3, camera series).
3. Please pull the car charger out after the electronic equipment's fully charged.
Operation Notes
1. Please plug the car charger after starting the car.
2. Please pull the car charger out after use or car flameout.
Note: Our products have protection functions, and the two tips above are suggestions just for safety.
3.Donotusethecarchargerwithelectronicproductswhichownover-chargingspecifications,soas
to avoid any problems caused by specification mismatching.
4. Car charger will be a little overheated in the use process, and it's a normal phenomenon that the
temperature is less than 65 degree Celsius under normal room temperature.
5.Whenthecarchargerstopsworkingunderover-current,over-temperatureorshort-circuitprotection,
please unplug the device after it automatically returns to work, then you need to check whether the
device is compatible with this charger.
6. Do not let the car charger close to fire, such as stove, candles etc.
7. Do not let the car charger soak into liquid, such as swimming pool, bathtub, etc.
8. Do not wash the car charger with corrosive cleaner.
9. If the car charger cannot work properly, please contact the store or distributor in your area.