Technaxx DigiScan DS-02 User Manual

Loading Slides
Hold up the slide toward the light. Face the
trademark slide of the slide away from you. The
slide should not appear as a mirror image, but
„normal“. Turn the the slide on it’s head (but it still
need to be shown the same side).
Open the slide holder at the marked spot on the top
(OPEN). Insert the slide into the holder so that it fits
perfectly.
Close the slide holder and press the edges so that
it locks in place. Hold the slide holder as shown in
the picture (you see the front page) and insert the
Slide Holder into the slot on the right side of the
scanner. Note: Dust, scratches or finger prints will
show up on your saved images.

Technaxx DigiScan DS-02 Specifications

General

Display	TFT
Scanner type	Film/slide scanner
Product color	Black
Built-in display	Yes
Display diagonal	2.4 \
Sensor type	CMOS
Compatible memory cards	SD, SDHC
Power supply type	DC
USB version	2.0
Standard interfaces	USB 2.0
Maximum ISO A-series paper size	-
Maximum scan size	- mm
Optical scanning resolution	- DPI

Weight and Dimensions

Depth	88 mm
Width	86 mm
Height	110 mm
Weight	300 g