Technaxx DigiScan DS-02 User Manual

Loading Negatives
Hold up the negative toward the light. As you look
through the negative, you should be able to read
the small negative numbers normally (not a mirror
image). Turn the the negative on it’s head (but it still
need to be shown the same side).
Open the negative holder at the marked poin
(OPEN). With the negative holder laid open place
the negative into holder so that the notches of the
negative are aligned with the notches in the holder.
Close the negative holder and press the edges so
that it locks in place. Insert the negative holder into
the slot on the right side of the film scanner, like
shown in the picture.

Technaxx DigiScan DS-02 Specifications

General

Display	TFT
Scanner type	Film/slide scanner
Product color	Black
Built-in display	Yes
Display diagonal	2.4 \
Sensor type	CMOS
Compatible memory cards	SD, SDHC
Power supply type	DC
USB version	2.0
Standard interfaces	USB 2.0
Maximum ISO A-series paper size	-
Maximum scan size	- mm
Optical scanning resolution	- DPI

Weight and Dimensions

Depth	88 mm
Width	86 mm
Height	110 mm
Weight	300 g