Technaxx DigiScan DS-02 User Manual

Proper Operation Sequence
(1) Slide or load film/negative film to board holder.
(2) Insert board holder to scanner. (3) Connect
scanner USB cable to PC. (4) Press button MENU
to turn on scanner. (5) Press button SCAN (SMALL
CAMERA) to start scanning. (6) Move the bracket
by hand, slide for slide or negative for negative. (7)
After scanning is complete, remove the memory
card. (8) The pictures can be read directly on the
PC from the memory card or via a USB connection.
3. Operation Guide
MENU SMALL CAMERA
& Power (On/Off) & OK & Recording

Technaxx DigiScan DS-02 Specifications

General

Display	TFT
Scanner type	Film/slide scanner
Product color	Black
Built-in display	Yes
Display diagonal	2.4 \
Sensor type	CMOS
Compatible memory cards	SD, SDHC
Power supply type	DC
USB version	2.0
Standard interfaces	USB 2.0
Maximum ISO A-series paper size	-
Maximum scan size	- mm
Optical scanning resolution	- DPI

Weight and Dimensions

Depth	88 mm
Width	86 mm
Height	110 mm
Weight	300 g