Installation
1. Insert the unit into the cigarette lighter socket.
2. Adjust the transmitting frequency of the FMT300BT to the corresponding channel
between FM 88.1 ~ 107.9 MHz.
3. Set the car radio unit to the same frequency as the FMT300BT.
Then the unit can play the music from a USB Flash Drive, a SD / SDHC / MMC
memory card or another audio source (through the audio-in).
Bluetooth Function Operations
(Pairing the device with a Bluetooth enabled mobile phone)
1. First set the FMT300BT (without memory card / without USB flash drive) in
ON status.
2. Press PLAY button for a longer time (at the unit directly or at the remote control)
until screen display shows “PAIRING” – indicating that the unit is ready to
be paired.
3. Set the Bluetooth mobile phone to search for Bluetooth devices.
The mobile phone displays “FMT300BT” in the list of available devices.
When using a “dongle-type” Bluetooth adapter, please follow the
manufacturer’s instructions for that device.
4. Select “FMT300BT” to pair with.
5. Put in the PIN Code “0000” at your mobile phone and it shows that pairing is
completed. When pairing is successful completed the FMT300BT screen
displays “Pair OK” and the Bluetooth icon is shown on the screen.