EasyManuals Logo

Technaxx MusicMan PRO BT-X35 User Manual

Technaxx MusicMan PRO BT-X35
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
9. Led light
controller
Short press to turn on/off RGB light.
10. Echo
Set echo effect (+more echo) / (- less echo)
11. Music volume
control
Increase (+) or decrease (-) the volume of the
music which is played. Is the control set to OFF
(total to -) the music is muted
12. Volume control
Increase (+) or decrease (-) the volume of the
microphone speaker. Is the control set to OFF
(total to -) the speakers are muted
13. Earphone Connector
Connect e.g. headphones
14. MicroSD Card Connector
Slot for MicroSD card
15 .Micro USB Charging
connector/ Aux Connector
Charging port DC 5V/0.5A and
slot for AUX IN connection
Charging
The battery must be fully charged before first use (~4–4.5 hours).
Plug the charging cable into Micro USB slot of the microphone, USB
slot of PC or other USB slot of chargers to get charged.
We recommend, charging the battery at least every 2–3 months,
even if the BT-X35 is not used.
When the microphone is being charged, indicator light turns red.
Once it is fully charged, indicator light turns off.
(We would suggest users turning off the microphone while charging.
It takes longer time to get completely charged if the microphone
works when being charged.) It turns off automatically at low battery
power.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx MusicMan PRO BT-X35 and is the answer not in the manual?

Technaxx MusicMan PRO BT-X35 Specifications

General IconGeneral
BrandTechnaxx
ModelMusicMan PRO BT-X35
CategoryMicrophone
LanguageEnglish