Bluetooth Mode
Turn on the microphone. Press and hold the power button for about
2 seconds. When the indicator next to the ON/OFF button lights up
BLUE, the microphone is in operating mode.
Connect the microphone with your Bluetooth device. (e.g.: smart
phone, tablet, PC). Go to settings and scan for the new devices in
your Smartphone.
The name of the microphone "MusicMan BT-X35" appears, you
have to select and connect it.
After successful Bluetooth pairing, you hear a signal from the
microphone.
After hearing the conformation sound the real connection between
both devices takes some seconds more!
Start your music playing from your music file. User could start
singing follow the music.
Press the key “ ” to play/pause; press the key “ ” to go back to
last track; press the key “ ” to move on to next track.
The microphone supports TWS function.
It is possible to connect two microphones to one Bluetooth device
(e.g. Smartphone). It does not matter which combination of BT-X35
and/or BT-X36 you are using.
Power on two microphones. Double click the power button (twice
shortly) on the first device. Do the same for the second device.
On each device you will hear a confirmation sound (ding ding dong)
after the double click. Wait about 10-20 seconds until the connection
via TWS was successful. You hear a confirmation sound (peep)
again. Connect one of the microphones to a Bluetooth device (e.g.
Smartphone). It is only needed that one of the microphones is
connected with Bluetooth to the Smartphone.
To Next Page
Loading...
Need help?
General