4
First start
Carefully read the user manual. Insert the USB power adapter of the device
into a socket with AC 220–240V. Be reminded: “Non-connected devices
always work faulty!”
Amplifier connection (if required)
While listening to your new turntable using the built in speakers you may
wish to connect it to your existing HiFi system.
Connect the audio plugs to the Line input on your mixer or amplifier using an
RCA cable (*not included)
Red plug into R channel input.
White plug into L channel input.
Phono Mode
IMPORTANT! When using the turntable:
Make sure to remove the stylus protector, as illustrated on the left picture (it
should easily slide off the stylus assembly).
Make sure to unclip the tone arm lock before use and to secure it again after
use.
1
Cartridge
2
Needle protection
To Next Page
Loading...
Need help?
General
