EasyManuals Logo

Technaxx TX-101 User Manual

Technaxx TX-101
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
6
Recording in Phono mode (Vinyl)
Firstly insert memory device (USB drive or SD card). When turntable is
working, press the REC key for 1-2 seconds on the top control board of the
unit, (between step 4 and 5 from “Playing a record”) now recording will begin
and REC LED is flashing. To stop the recording press the Pause/Play/Delete
key short or set the tone arm back on the his start position.
Delete recorded music file
After you have finished the recording press USB/BT/REC for playback. If you
now want to delete the recording press Play/Pause/Delete button. The file is
deleted.
NOTE: When you insert both USB drive and SD Card, the recorded file will
be saved into the later inserted device. Recorded file in MP3 format with
128Kbps.
How to replace a needle
Removing the needle from the
cartridge:
Inserting the needle:
1. Guide Pins (inside)
Place a screwdriver at the tip of the
needle heads hell and push
downwards in the direction shown in
sketch “A”. Remove the needle head
shell by pulling it forwards and pushing
downwards.
Hold the tip of the needle head shell
and insert it by pressing in the direction
illustrated by “B”. Push the needle
head shell upwards in the direction
illustrated by “C” until the needle locks
into the tip position.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technaxx TX-101 and is the answer not in the manual?

Technaxx TX-101 Specifications

General IconGeneral
BrandTechnaxx
ModelTX-101
CategoryMedia Converter
LanguageEnglish

Related product manuals