Alarm Clock
You can set up two alarms on the TX-139. To adjust the alarm,
use previous track / next track to choose Alarm: on, set the
hour, set the minute, set the volume and set the mode (alarm,
DAB+ or FM). Use Play/Pause button to confirm the input.
When the alarm starts, press Play/Pause button to activate the
snooze function. TX-139 starts alarming again after 9 minutes.
To exit, press power.
Note: If you want to be woken up and the TX-139 should not
play music all night. Press the power button to enter standby
mode.
Sleep time
To adjust the sleep time, press previous track / next track to set
the counter between 5 and 120 minutes (5, 15, 30, 60, 90,
120min). Use Play/Pause button to confirm the input. After the
set time TX-139 turns into standby mode.
Factory reset
To set the device back to factory settings choose “Yes”. Choose
“No” for cancel. Use play/pause button to confirm the input.
System version
Look up the firmware version here.
Backlight
Set the time how long it should take the backlight to go off. Set
it by pressing previous track / next track. Use play/pause button
to confirm the input.
Contrast
Set the contrast (0-31) by pressing previous track / next track.
Use play/pause button to confirm the input.
To Next Page
Loading...
Need help?
General