HDMI ARC
Note: Please check if your television supports HDMI ARC first.
The HDMI connector should be labelled with “(HDMI-) ARC” or
refer to the user manual of your television for more information.
Plug a HDMI ARC supported cable in the HDMI ARC port (12) at
the soundbar. Switch to the mode HDMI. Now the soundbar is
connected to your television. The volume adjustment can be
done with the TV remote control.
In some cases, there are additional settings which must be
activated in the TV options. Please refer to the user manual of
your TV separately to avoid misunderstandings.
LED backlight
Turn on the LED by press the “LED” button (8) on the device or
press LED button on the remote control (13).
To change between the colours, single press the light button.
The colours are following: White / blue / green / red / turquoise /
purple / yellow.
Note: The light is in off-state again after the last colour.
Menu
Enter the menu with the press and hold on the mode button (7)
or with press the remote-control menu button (11). Navigate with
prev/next button and enter an option with play/pause.
Options are Time/Date, Alarm1, Alarm2, Sleep time, Factory
reset, System version, Backlight, Contrast.
Exit with the mode button at the device or menu button at the
remote.
Time/Date
To adjust the date and the time press previous track/next track
and confirm with play/pause button
To Next Page
Loading...
Need help?
General