8
Assembly:
Note: ⚫ Insert the power cable before inserting the camera to the camera holder
through the power cord outlet. Pull the other end of the cable out of the outlet and
then insert the camera from top to bottom into the camera holder of the container.
⚫ When the camera does not need an external power supply, insert the rubber
plug of the DC socket of camera into the DC hole to ensure the waterproof.
8. If you use the bird house without a stand, put the house on a flat surface or
hang it on a tree with a string. Add water to the basin and knock down the clasp of
the flap, the bird food will flow down.
Mounting the Bird house
Wall mount without mounting belt
You can mount the house permanently on a wall using the supplied wall mount.
Before mounting the house, you should ensure that all existing screws are tight.