Date
With the UP or DOWN navigation
key you can set the Date.
Press OK key to confirm the setting.
Select Exit with the UP/DOWN
navigation key to go back to the
Main Menu.
Time
With the UP or DOWN navigation
key you can set the Time.
Press OK key to confirm the setting.
Select Exit with the UP/DOWN
navigation key to go back to the
Main Menu.
Date & Time Display
With the UP or DOWN navigation
key you can set the Stamp.
Default setting is ON.
If select OFF, Date & Time will NOT
be shown on the LCD.
Press OK key to confirm the setting.
Select Exit with the UP/DOWN
navigation key to go back to the
Main Menu.
Auto Switch Setting
Press UP or Down navigation
key to select “Auto Switch
Setting of the cameras” and
press OK key to enter and then
press OK key to confirm the
setting.
Under this mode, video can
auto switch to show on the
LCD.
To Next Page
Loading...
