Technaxx TX–28 - Page 8

8.4. Contrast / Brightness Mode
Press Menu key to display the main menu.
Press LEFT or RIGHT navigation key to select the
“Contrast/Brightness Mode”. Press OK key to enter it.
Then below settings are shown:
Contrast / Brightness
Press UP or Down navigation
key to select “Contrast”.
With the LEFT or RIGHT
navigation key you can choose
between a value range from
1 – 9.
Press OK key to confirm the
selection.
Select Exit with the UP/DOWN
navigation key to go back to
the Main Menu.
Contrast / Brightness
Press UP or Down navigation
key to select “Brightness”.
With the LEFT or RIGHT
navigation key you can choose
between a
value range from
0 – 9.
Press OK key to confirm the
selection.
Select Exit with the UP/DOWN
navigation key to go back to
the Main Menu.