Fahrenheit
Celsius
Alarm ON
Alarm OFF
Screen
steady on
Under time mode
Press UP to choose the temperature
format: Fahrenheit (°F) or Celsius (°C).
Press D
ON/OFF of alarm one/two.
Press V/S to change from screen steady
ON (ON:SD) to screen auto off (–:SD).
When the screen is off, slightly knock on the
clock, the screen will turn on. The time &
date & temperature will be displayed in
order for 2 times. Then the screen turns off
again.
Screen off
Settings
①
Alarm
mode
②
Alarm
mode
Alarm
hour
Alarm
minute
Alarm On
Alarm setting
Under time mode, press DOWN 1x, then
press SET, enters into ① Alarm setting
mode.
Press UP/DOWN to turn on/off alarm.
Press SET to set hour firstly by using the
UP and DOWN button.
Press SET the second time to set Alarm
minute by using the UP and DOWN
button.
After finish ① alarm, press SET into ②
alarm setting, same way as ①.
Note: Alarm clock with "beep" lasting for 1
minute, press any button to stop it when
ringing.
This clock has snooze function, defaulted
interval is 5 minutes. When setting alarms,
if there is no operation during 10 seconds,
the device returns back to time display
mode.
Alarm Off
To Next Page
Loading...
General