Technaxx TX-93 User Manual

1
Technaxx
®
* User Manual
Video Watch with FullHD Camera TX-93
8GB Watch for video recordings with sound
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the
device the first time, please read the user manual carefully.
This device has a rechargeable battery. It must be fully charged before
first use. NOTE: Charge the battery of the device every 2–3 month if it is
not used!
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
The support hotline is available Mon-Fri from 9 am to 1 pm & 2 pm to 5 pm
Keep this user manual for future reference or product sharing carefully. Do the
same with the original accessories for this product. In case of warranty, please
contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product. Share your experience and opinion on one of the
well-known internet portals.
Features
⚫ Video watch with integrated 1MP FullHD camera and microphone
⚫ Inconspicuous camera lens in the dial
⚫ Video resolution 1920x1080 (interpolated) with sound
⚫ Separate sound recording (WAV)
⚫ 8GB flash memory
⚫ 4x IR LED for night vision ~1m
⚫ Protection class IP65 (dust proof & water jet proof)
⚫ Easy transfer via USB cable to a PC
⚫ Plug & Play device

Technaxx TX-93 Specifications

General

Waterproof	IP67
Water Resistance	IP67
Connectivity	Bluetooth 4.0
Resolution	240x240 Pixel
Bluetooth	Yes
Functions	Heart rate monitor, step counter, sleep tracker, notifications
Compatibility	iOS 8.0 or higher & Android 5.0 or higher
Sensors	Heart rate sensor
Display	1.3" TFT

Summary

Warranty Information

Product Features

Technical Specifications

Charging Status and Low Battery

Charging the Device

Connect via USB cable or adapter. Red LED flashes during charging; Blue LED is solid when fully charged. Approx. 3 hours.

Low Battery Indicator

Blue LED flashes quickly during low battery. Camera turns off automatically after saving files.

Device Overview and Controls

Operating Modes

Turning the Camera On

Press and hold the Power/Video button for two seconds. Blue LED steady ON indicates power on and standby mode.

Recording Video

Press Power/Video button shortly in standby mode. Blue LED flashes 3x, then turns off. Press again to stop. Recording saved automatically.

Recording Audio Separately

Press Audio recording button shortly in standby mode. Red LED flashes 3x, then turns off. Press again to stop. Recording saved automatically.

Infra Red Mode Operation

Turning the Camera Off

Resetting the Device

Connecting to a Computer

Connecting via USB Cable

Connect watch to PC USB port. Watch functions as removable disk for data transfer and management.

Setting Date and Time Stamp

Edit time.txt file via PC. Format Year-Month-Day hour:minute:seconds. Save changes to apply.

Disconnecting from PC

Safely remove hardware via Windows interface. Select 'Stop' and confirm to disconnect the watch safely.

Waterproof Functionality

Knob Identification

Distinguish between MIC knobs with sound holes (MIC1) and waterproof sealing pads (MIC2).

Knob Usage Guidelines

Use MIC1 for normal recording, MIC2 for waterproof conditions. USB knob requires tight screwing for protection.

Frequently Asked Questions

Warnings

Disposal Information

CE Conformity and Battery Handling

CE Marking

Products marked meet European Economic Area regulations. Declaration of conformity available upon request.

Battery Safety and Disposal

Keep batteries from children. Handle with care, do not short, deform, or incinerate. Return used batteries for recycling.

Environmental Protection

Recycle packaging. Avoid domestic waste disposal for devices and batteries. Clean with a soft cloth.