12
STEP 1 Press the MODE selector button and select (AUTO).
STEP 2 Press the ON/OFF button and switch the air conditioner ON.
STEP 3 Press the temperature setting buttons (TEMP.).
The air conditioner starts operating after automatically selecting the type of operation
—whether heating, drying (dehumidifying) or cooling—that suits the conditions in the
room, and automatically adjusting the temperature, fan speed and airflow direction.
Each time one of the temperature setting buttons (TEMP.) is pressed, the temperature is
changed by 1 °C.
The temperature can be changed from +4 °C (higher) to
–4 °C (lower) from the standard temperature setting.
(The upper limit during cooling is 30 °C.)
Operation with the Remote Control
Unit
1. Automatic Operation
Standard temperature settings during automatic operation
Type of operation Standard temperature setting
Heating 24 °C
Drying 20 °C to 26 °C range
(The exact temperature depends on the prevailing temperature
when the unit starts operating.)
Cooling 27 °C
STEP 2
STEP 3
STEP 1
To Next Page
Loading...
