Technibel MCAF184MR5IAA - Remote Control Unit (Display)

7
(5) ECONOMY ..............................
(6) High power operation ...........
(7) Flap indication
Auto. flap indication ..............
Flap angle indication .............
Sweep indication....................
(8) Fan speed
Automatic operation .............
HIGH .......................................
MEDIUM .................................
LOW ........................................
(1) Operation mode
AUTO ......................................
HEAT.......................................
DOUBLE SENSOR DRY .........
COOL ......................................
(2) Confirmation of
transmission ..........................
(3) Set temperature
16–30 °C
When set to 28 °C .........
Current temperature
indication ......................
(4) Timer
ON Timer ...............................
OFF Timer ..............................
1-hour OFF Timer ...................
Remote Control Unit (Display)
Displayed when indoor
unit sensor is in use
Displayed when setting
timer
Displayed when
transmitting data
Displayed when setting
temperature
Symbols
Displayed when setting temperature in
automatic operation
elector