12
Operation with the Remote Control
Unit
1. Automatic Operation
The air conditioner calculates the difference between the thermostat setting
and room temperature, and automatically selects ‘‘COOL’’ or ‘‘HEAT’’ mode as
appropriate.
Check that the circuit breaker on the power panel is turned on.
Once mode is selected and the unit is preset by following the steps below,
you can have the air conditioner automatically bring the room to the desired
temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector button to .
STEP 2 Press the ON/OFF operation button.
To stop the air conditioner, press the ON/OFF operation button again.
• To change the temperature setting; press the temperature setting buttons
and change the setting to the desired temperature.
STEP 2
STEP 1
NOTE
NOTE
OI-047-12-EG
01_MCAF78MR5I_EN.fm Page 12 Friday, November 2, 2007 2:28 PM
To Next Page
Loading...
