EasyManua.ls Logo

Technibel MTF 84 - Porthole Kit; Accessories (Supplied on Request); Air Clean Filter

Default Icon
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
EG
PORTHOLE KIT
ACCESSORIES (SUPPLIED ON REQUEST)
Secure the “air clean filter” on to the standard filter by the spring
attached before in step 2.
3
Hook the handle to the standard filter and reinsert the filter
assembly in the unit with its “FRONT” mark towards you.
Replacement of air clean filter
The air clean filter is disposable.
Do not throw away the filter frame and spring.
The used filter cannot be reused even after cleaning up.
Buy the air clean filter for replacement at your nearest dealer.
Check the state of dirtiness at least once every two weeks
and replace the filter when it changes to be so dirty as the
colour of the label “colour gauge for filter replacement”.
4
“Air clean filter”
standard filter side: white
(dust collecting filter)
Spring side: black
(deodorizing filter)
standard filter
spring
1. This carton box contains an air clean filter, a spring and a label
“Color gauge for filter replacement”.
2. Open the bag just before installing the air clean filter.
lf not, the deodorization effect durability of the filter may be
decreased.
AIR CLEAN FILTER
Read these instructions before starting replacement work.
This “Air Clean Filter” collects dust as well as deodorizes.
NOTE
Filter installation procedure:
Take out the filter assembly.
Separate the standard filter from the handle.
Stick the label “Color gauge for filter replacement” in an easy-to-
see position (inside of control panel cover).
1
Attach the spring onto the standard filter:
Hook the spring onto the air filter from its rear side and engage it
into the groove on the “FRONT” mark side (use of a standard
screwdriver is recommended for easy setting).
2
standard
filter
Filter
assembly
spring
ASSEMBLING
Make a hole in the window
pane.
Insert the porthole without
the plug.
Remove the terminal pipe
fitting of the warm air outlet
from the retractile flexible
pipe.
Bring the air conditioner
near the window and insert
the air outlet in the port-
hole.
SINGLE GLASS
DOUBLE GLASS
If you want to utilise the air conditioner in several rooms, it is
possible to buy varies portholes for air discharge separately.
HOLE
NOTE
HOLE
HOLE
NOTE
NOTE
Eliminate one or two membranes, cut-
ting them with the scissors according
to the thickness of the glass.

Related product manuals