Technibel PHRIE Series - Page 140

140
6.2.3 ALARM HISTORY DISPLAY
Possibility to display the 4 last events concerning frigorific circuit managed by A3 board.
Press and hold buttons and simultaneously for 4 seconds or longer to display alarm history mode.
Use temperature setting buttons and to display the alarm item code. “01” indicates the most recent alarm;
“04” indicates the oldest one.
To clear the alarm history, press the button.
To return to normal display, press button .
See § 5.1 for alarms list
6.2.4 VALUES DISPLAY FOR MONITORING
Press and hold buttons and simultaneously for 4 seconds or longer to display values.
Use temperature setting buttons and to display the value item code (see table below).
To return to normal display, press button .
Alarm on frigorific circuit - example (see details in §5.1)
Alarm message « E04 » - blinking
Alarm history - example
Alarm message « F02 » - blinking
Alarm item code (01 to 04) – blinking
Values display - example
Measured value : 114 Hz
Value item code
“19” corresponds to compressor frequency