46
After sales kit 9901280 for models 095 & 125:
CONTENT Unit 095 125
Type
SIKA / VKX
Reference
VKX 20M
Setting – ON point l/mn
4.5
Setting – OFF point
l/mn 4
Body
PPO Noryl GFN3
Connection
¾’’G
Pipe connection
Contact rating
230Vac - 26 VA max.
Protection
IP 65
Installation of the kit on heat pumps 095 and 125:
• Remove the original water flow switch (9 l/mn IMIT model).
• Put in place the new water flow switch (4,5 l/mn SIKA model).
¾ Respect the water direction (see the arrow on the top of the flow switch).
¾ Use the two supplied gaskets.
• Connect the two wires on the terminals 24 and 25 of the terminal block XA in the electrical box.
Flow switch SIKA VKX 4.5 l/mn
Pipe connection
1’’ Nut
Flow switch connector ¾’’
Ori
To Next Page
Loading...
