EasyManuals Logo

Technical Pro Hybrid Series User Manual

Technical Pro Hybrid Series
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Hybrid Series
1. The remote should be used within 20 feet in front of the unit.
2. There should be no obstacles in between your remote and the unit,as this will hinder the remote’s
functionality.
3. To maximize the effectiveness of your remote control,keep the remote sensor(located on the front
of the unit)out of direct sunlight.
REMOTE CONTROL OPERATION
exit. If both USB flash drive and SD card are connected, the unit will begin recording onto the USB
flash drive. If the USB flash drive is full, remove it and then press the record button again to start
another recording. The unit will also be able to record the signal from microphone onto the USB flash
drive or SD Card. When the recording funcion is activated and there is a microphone connected and
have it turned on, the unit will mix the signal from tuner, MP3 or DVD with the microphone’s into one
track. If two microphone are connected and turned on, both signals from them will be recorded and
mixed into one track with the signal from tuner, MP3 or DVD.
THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS USB/SD/BLUETOOTH.
THE RECORDING FILE FORMAT IS .WAV.
22.A/B: Press this button to switch the output speakers among Group A, Group B and Group A&B.
23.
Next & Previous Station:
Press either these buttons to go to the previous or next stored station
on FM or AM Input.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technical Pro Hybrid Series and is the answer not in the manual?

Technical Pro Hybrid Series Specifications

General IconGeneral
BrandTechnical Pro
ModelHybrid Series
CategoryAmplifier
LanguageEnglish

Related product manuals