Why is there no sound coming from my Technical Pro Speakers?
If there's no sound from your Technical Pro Speakers, first, check that the master volume isn't set to zero; if it is, turn the volume control clockwise. Also, ensure the 1/8” AUX/RCA wires are securely connected. Finally, make sure the input selector is switched to the correct setting.
How to turn on Technical Pro PK15BT?
To turn on your Technical Pro Speakers, ensure the power cord is plugged into an outlet. Also, check that the main power switch is set to the ON position.
What to do if the mic input isn’t coming out of the Technical Pro PK15BT?
If the mic input isn't coming out of your Technical Pro speakers, first, ensure the wired mic is securely plugged in. Next, verify the wired mic is plugged into the mic input port, not the guitar input. Finally, increase the mic volume to the desired level.
General| Type | Portable Bluetooth Speaker |
|---|---|
| Power Output | 15W |
| Bluetooth Version | 4.2 |
| Speaker Size | 5.25 inches |
| Tweeter Size | 1 inch |
| Bluetooth | Yes |
| RMS Power | 15W |
| Peak Power | 30W |
| Built-in Amplifier | Yes |
| Microphone Input | Yes |
| Remote Control | Yes |
| Inputs | USB, AUX |
| Impedance | 4 ohms |
| Frequency Response | 20Hz - 20kHz |
To Next Page
