Technicolor MediaAccess TC8717T Quick Installation Guide

2
2SETUP
2.1 Connect the MediaAccess Gateway to the MoCA/Cable network
Proceed as follows:
1 Make sure that one end of the coaxial cable is correctly connected to
your cable splitter or coaxial wall jack.
2 Connect the other end of the coaxial cable to the MoCA/Cable port
of the MediaAccess Gateway. The MoCA/Cable port connects you
both to your service provider’s broadband network and the MoCA
devices in your home cable network.
2.2 Power on the MediaAccess Gateway
Proceed as follows:
1 Take the power cord that is included with your MediaAccess Gateway.
2 Connect the small end of the power cord to the Power port on the
back of the MediaAccess Gateway.
3 Plug the other end of the power cord into an electrical outlet.
4 Wait at least two minutes to allow the MediaAccess Gateway to
complete the startup phase.
MoCA/Cable

Technicolor MediaAccess TC8717T Specifications

General

Device Type	Cable Modem Router
DOCSIS Standard	DOCSIS 3.0
Downstream Channels	8
Upstream Channels	4
Max Download Speed	343 Mbps
Max Upload Speed	122 Mbps
Ethernet Ports	4
Wi-Fi	Yes
Wireless Speed	N300
Frequency Band	2.4 GHz
Security Features	WPA, WPA2
Telephony	No