Technicolor TX061AEI

1. Indtroduction
The TX061AEI is a new networked 4K WiFi client set-top box model that is targeted
for Comcast’s TX061AEI WiFi client. This is a new design that incorporates next
generation silicon in 28 nm geometry and is expected to bring high powered CPU
processing power that will support the many networking software applications that
Comcast is looking to deploy. The TX061AEI is expected to incorporate
state-of-the-art WiFi capabilities. Networks supported include 802.11ac,
2.5Ghz/5Ghz c WiFi and Ethernet. Wi-Fi configurations would include 2x2.
Features include up to 14,000 DMIP’s of computing power; 2160p60 decode of H.265
or H.264 content and display resolutions up to 2160p60; 3D graphics; Advanced HDR
(ITM/Dolby), HDMI TX/RX v2.0, and upgraded security like Adobe Access.

Technicolor TX061AEI Specifications

General

Manufacturer	Technicolor
Model	TX061AEI
Category	Set-top box
Video Output	HDMI
Connectivity	Ethernet
USB	Yes
Supported Video Formats	MPEG-2, MPEG-4, H.264
Supported Audio Formats	AC3

Summary

Introduction to TX061 AEI Set-Top Box

TX061 AEI Functional Overview and Components

Physical Dimensions and Housing

Details the housing size of the set-top box, including TEP.

System-on-Chip (SoC) Identification

Identifies the System-on-Chip as the Broadcom BCM7268.

WiFi and RF4 CE Chipset Details

Specifies the WiFi chip as Qualcomm QCA6174A and RF4CE chip as GP502.

Power and Communication Interface

Describes USB-C power input supporting USB 2.0 communication.

Product Visuals and Material Specifications

Safety, Regulatory, and Environmental Information

Safe Equipment Usage and Product Operation

Provides essential safety precautions for using the product and operating it correctly.

Product Symbols and Software Usage

Explains product symbols and guidelines for software and firmware use.

Environmental and Battery Disposal

Details environmental considerations and proper disposal of batteries.

Detailed Operational and Safety Guidelines

Climatic Conditions and Ventilation

Specifies operating temperature, humidity, ventilation, and positioning requirements.

Cleaning, Moisture, and Powering Safety

Provides instructions for cleaning, handling moisture, and electrical powering safety.

Battery Handling and Servicing Precautions

Covers safe battery handling, servicing, and conditions requiring service.

Regulatory Compliance and RF Exposure

Interface Classifications and Product Movement

Details interface classifications and safety during product movement.

Canadian Radio Frequency Interference

Provides Canadian compliance statements for radio frequency interference.

US FCC Radio Frequency Interference and Exposure

Outlines FCC compliance, interference statements, and RF exposure guidelines.