Recording on the VCR (VCR 1)
Recording from an audio source
Recording from the tape deck is not possible.
1
_ S.i.ctt,. ;.d,o;o.rc;tobe recorded.
If you make a mistake in operation or if sound output stops due to
some operation which was performed, the HELP function
displays information which can be useful for indicating the
method by which this condition can be remedied.
If "ERROR" or scrolling characters (for instance, "TAPE
MONITOR ON NOW") appears on the display during operation,
carry out the following operation.
- HELP
(D
--RESET
f \
....!...........]_
_ _"_'-_s,_ .... "_0-
- HELP
Press -HELP. (Touchonly.)
The method for remedying this situation will be
displayed,
................ o.i..vc"
Follow your VCR's operating instruc-
tions.
For your reference
If the above button is pressed for 2 second or more until
"RESET" appears on the display, the operation settings for the
unit will be initialized to the settings made at the time of ship-
ment.
However, any broadcasting stations which have been preset into
memory will not be erased at this time.
................_,gi.ii_,;,;.aio;Ourc;toberecorded.
For your reference
If a video CD changer is connected to the "CDNIDEO CD" ter-
minals, you can record a picture from the video CD changer by
following the above procedure.
Precautions in recording a audio source
If not recording the picture from VCR2 or a video CD player,
either turn the unit OFF or select VCRI.
The unit is set such that video signals input at video input ter-
minals "VCR2" and "VIDEO CD" are output from the "VCR1" vi-
deo output terminal on the back of the stereo.
Therefore, when recording an audio source, if the VCR2 source
or video CD player is playing, the picture will be recorded through
VCR 1.
The On-Screen Display function can provide a wide range of infor-
mation on a TV screen making the operation even easier. For ex-
ample, by using the amplifier button(s), the state of each setting
will display. If there is no sound and you do not understand the
operation, press the HELP button to use the unit diagram
displayed on the TV to display the applicable method.
Refer to the included supplemental instruction manual for details
on the On-Screen Display functions.
Product service
Do not attempt to remove the cover(s) or repair the unit
yourself.
Refer servicing to qualified personnel only.
Product information
For product service, product information or assistance in pro-
duct operation, refer to the servicenter directory.
22
To Next Page
Loading...
Need help?
General
